'66-72 B-Body Products

Review Your Shopping Cart

Like Us on FacebookGoogle+TwitterYouTube


 

JUMP TO:

NEW! 5.7/6.1 Hemi Kits
Engine Conversion and Replacement Kits for '66-72 B-Body
Poly-Locs for '66-72 B-Body
Torque Straps and Tranny Mounts for '66-72 B-Body
Gasket Kits for '66-72 B-Body
Headers for '66-72 B-Body


tr>

NEW! 5.7/6.1 Hemi Kit

'66-72 B, 66-73 C, 70-74 E-body V8 and B/RB to 5.7/6.1 Hemi Kit

You've been asking for them and now they're finally here! New 5.7/6.1 Hemi passenger car conversion kits featuring the Schumacher quality, backed by our thorough research and testing, that Mopar enthusiasts have come to rely on in all our products. Kits include powder coated steel brackets, polyurethane spool bushings, and a complete bolt package. Everything you need for easy engine installation. Installation requires no k-member fabrication. (see installation tech tips)

*NOTE* A low mount 6.1 car style air compressor requires a different bracket: part # BCEH57H-AC

BCE57H - $259 + $20 S&H

BCE57H-AC - $259 + $20 S&H


Stud

Double-Ended Stud

The 5.7/6.1 Hemi oil pan requires a double-ended stud on the #3 main bearing cap to help support the oil pick-up tube. This stud comes standard in trucks but isn't on the passenger car engines. The stud can be purchased from SCS or your Dodge dealer. The part number is 6506333AA.

(Click here for installation photos)

DE-Stud - $12 + $7 S&H

(back to top)

Engine Conversion and Replacement Kits for '66-72 B-Body

B,C,E-Body Hemi Conversion Kit

B,C,E-Body Hemi Conversion Kit

'66-72 B, '70-74 E, '66-73 C-Body. They said it couldn't be done: A direct bolt-on hemi conversion kit that offers factory-correct position and race performance strength — along with a smooth, insulated ride. But Schumacher has done it! Our bullet-proof, spool mount Hemi Kit lets you easily bolt a new crate or original street 426 Hemi to your V8 or B/RB k-member — with no additional fabrication, expensive K-member changes, cutting, welding, suspension changes or additional installation parts required. Fits factory Hemi manifolds, works with power steering, power brakes, and automatic and manual transmissions. Kits include powder-coated brackets, polyurethane bushings, bolts.
(see installation instructions and tech tips)

BCEH - $259 + $18 S&H


 

B,C,E-Body V8 to B/RB Swap or Replacement Kit

'66-72 B, '70-74 E, '66-73 C-Body B/RB. Big Block B & E-Body cars are expensive - so why not build your own by converting your small block to the B/RB? Or maybe you need more power to tow your race car with your C-Body? These quality, reproduction bracket kits are what you need for both B,C,E-Body 273/318/340/360 to Big Block conversions and original B/RB replacements. These brackets bolt a 383, 400 or 440 to factory specs directly on your original V8 or B/RB K-member and fit all factory accessories. Kits include powder-coated brackets, factory-style insulators, grade 8 bolts. Available with original rubber insulators or our polyurethane Poly-Loc insulators.
(see installation instructions and tech tips)

BCEB - $144+ $18 S$H

BXBL (with Poly-Locs) - $294 + $20 S&H

 


BCELA

(340/360 shown)

B,C,E-Body V8 273/318 or 340/360 Replacement or Upgrade Kit

'66-72 B, '70-74 E-Body 340/360. Want to swap your 318 for a new Magnum 360 but can't find the brackets you need? Or is your restoration project being held up by badly damaged or missing brackets? Well now you can stop spending fruitless hours at the wrecking yard - we've reissued the hard to find brackets you need. Kit includes powder-coated brackets, factory-style insulators and grade 8 bolts. Available with original rubber insulators or our polyurethane Poly-Loc insulators.
(see installation instructions and tech tips)

BCELA (340/360) - $144 + $18 S&H

BCEA (273/318) - $144 + $18 S&H

BX3L (340/360 with Poly-Locs) - $294 + $20 S&H

BX2L (273/318 with Poly-Locs) - $294 + $20 S&H

 

Poly-Locs for '66-72 B-Body

B,C,E-Body Small Block & B/RB Poly-Locs

B,C,E-Body Small Block & B/RB Poly-Locs

'66-72 B, 66-73 C, 70-74 E Small Block & B/RB Poly-Loc Set (All engines except S6 & Hemi). Click here for more Poly-Loc info.

BXEP - $199 + $15 S&H

 


'66-70 B-Body Original 426 Hemi Poly-Locs

'66-70 B-Body Original 426 Hemi Poly-Locs

'64-70 B-Body Original 426 Hemi Poly-Loc Set. Click here for more Poly-Loc info.

B3HP - $263 + $15 S&H


'71B, 70 & 71 E-Body Original 426 Hemi Poly-Locs

'71B, 70 & 71 E-Body Original 426 Hemi Poly-Locs

'71B, 70 & 71 E-Body Original 426 Hemi Poly-Loc Set. Click here for more Poly-Loc info.

E1HP - $263 + $15 S&H

Torque Straps and Tranny Mounts for '66-72 B-Body

 

TQBE

'66-72 B, '70-74 E-Body Torque Strap

Throw away your chains and broken motor mounts; our new torque strap can handle all the upgraded power and excess vibration your B-Body small block or B/RB engine can dish out. Mounts in existing sway bar location on some models.
(see instructions and installation photos)

NEW! B & E-Body C-shaped bracket! Revised bracket now sold with all B & E-Body Torque straps.
TSABE Rev2
(see revised bracket instructions and installation photos)

TQBE - $79 + $15 S&H

 


Early Style Polyurethane Tranny Mount

Early Style Polyurethane 1-Stud Tranny Mount

'67-72 A, '66-70 B, '66-68 C, and some '71 B-Body. (Chrysler changed the B tranny mount styles mid-year 1971.)

TMES - $99 + $13 S&H

 


Bolt-Thru Polyurethane Spool Tranny Mount

Bolt-Thru Polyurethane Spool Tranny Mount

The tough, durable, direct bolt-on tranny mount you've been asking for — '69 & up C, '70-74 E, '72 & up B, '73 & up A, F, M, J, some '71 B-Body. (Chrysler changed the B tranny mount styles mid-year 1971.)

TMBT - $99 + $13 S&H

 

Dipsticks for '66-72 B-Body

   

Gasket Kits

Tired of wet feet and ruined carpet?

A & B BODY OWNERS - STOP WIPER PIVOT LEAKS CAUSED BY WORN OR MISSING GASKETS. The only complete Wiper Pivot Water Seal Kit. The quality solution to one of the most common A & B Body Mopar leaking problems.

When it rains, does water run down your left leg on the driver's side? If you're an A or B-Body owner, most likely the cause is damaged wiper seal gaskets. Replacing them will help keep you dry — and help you protect your investment.

• Seals are black, 100% rubber — for optimum durability and concourse approved look

• Precision engineered for your car year and body type

• Each kit contains 2 seals, 2 base gaskets, 2 caulk strips, 2 grease fittings, complete, easy-to-follow instructions and tech tips to help extend the life of your wiper pivots.

 

'66-70 B-Body Wiper Seal Kit

'66-70 B-Body Wiper Seal Kit

Complete Wiper Seal Kits give you the quality gaskets you need to stop wiper seal leaks, plus, troubleshooting tips to help you identify damaged pivots and grease fittings, and instructions on how to re-grease your pivot for longer life.
(see installation instructions and tech tips)

Click here for the Wiper Seal Kit Installation Guide Article

WP6670B - $11.50 + $7 S&H

'66-70 B-Body Firewall Gasket Kit

'66-70 B-Body Firewall Gasket Kit

Our Precision Gaskets protect against rust, dirt and water damage — and always provide a correct fit, with no cutting or trimming. Complete kits include: steering column, master-cylinder, accelerator, heater tubes, heater/blower, electric bulkhead connect and AC gaskets. 75% of these important firewall gaskets are NOT available from any other source. With or without AC.

FG6670B - $21.50 + 7 S&H

FG6670B/AC - $21.50 + 7 S&H


'71-74 B-Body Firewall Gasket Kit

'71-74 B-Body Firewall Gasket Kit

Our Precision Gaskets protect against rust, dirt and water damage — and always provide a correct fit, with no cutting or trimming. Complete kits include: steering column, master-cylinder, accelerator, heater tubes, heater/blower, electric bulkhead connect and AC gaskets. 75% of these important firewall gaskets are NOT available from any other source. With or without AC.

FG7174B - $21.50 + 7 S&H

FG7174B/AC - $21.50 + 7 S&H

Headers for '66-72 B-Body B/RB

Hi-Flow Tri-Y Under Chassis B/RB Headers

(click image for large view)

Click here to read the Mopar Action 2001 'Headers You Can Love' Article

Click here to read the SCS original 2002 'Smokin' Barracuda' Article

Click here to read the Mopar Muscle 2008 'Go Big' Article

 

Hi-Flow Tri-Y Under Chassis B/RB Headers

Dread the thought of struggling to shoe-horn one-size-fits-all racing headers into your high-performance street car, only to lose your power steering?

Well, now there's relief for the all-too-common B/RB exhaust system headaches.

Our new under-chassis, Tri-Y header system gives you high-flow header performance and a custom fit that means you don't have to sacrifice your power steering. Retain exhaust studs in the heads — no more breaking into a water jacket! Plus, unlike most headers, it doesn't capture the starter, and, because it's designed specifically for your application, it installs quickly and painlessly — even with the engine in place. Applicable to '67 and up A-Body B/RB (400-500 hp), '63 & up B-Body and E-Body, with manual or power steering and automatic transmission.

(see installation instructions and tech tips)

(Click here for complete header specs!)

HCE (Ceramic Coated) - $800 + $35 S&H

HC (Chrome Plated) - $635 + $35 S&H

H (Uncoated) - $550 + $35 S&H

*NOTE* On occasion shipment of Chrome and Ceramic Headers might be delayed due to plating time

 


Small Block Hi-Flow Tri-Y Under Chassis Headers

(click image for large view)

Small Block Hi-Flow Tri-Y Under Chassis Headers

Designed to work with '67 & up A-bodies, '62 & up B-bodies, and '70-74 E-bodies for engine styles 273, 318, 340 & 360. Our Small Block Headers are built only ten sets at a time, and each set is individually test fit for quality and accuracy.

Our new under-chassis, Tri-Y header system gives you high-flow header performance with a custom fit that means you don't have to sacrifice your power steering. Retain exhaust studs in the heads — no more breaking into water jackets! Plus, unlike most headers, it doesn't capture the starter, has excellent spark plug clearance, and is easily installed from the top down. Works with manual or power steering.
(see installation instructions and tech tips)

(Click here for complete header specs!)

• Works with automatic transmission only
• Requires smaller than stock starter (see recommended)
• Requires 90 degree oil filter adaptor or the shorty oil filter
• Tri-y step up design
• 1 3/4” primary - 2” secondary - 2 1/2” collector.
• 14 gauge steel tubing
• 3/8” flanges at the head
• Ball and socket joint at the collector
• High quality welds
• Mandrel bent for smooth flow
• Retain the exhaust studs in the heads
(no more cooling leaks)
• Does not capture the starter

HSBCE (Ceramic Coated) - $950 + $45 S&H

HSBC (Chrome Plated) - $760 + $45 S&H

HSB (Uncoated) - $680 + $45 S&H

*NOTE* On occasion shipment of Chrome and Ceramic Headers might be delayed due to plating time

 

 

 

 

 

 



(back to top)
Header Accessories

Starter

(click image for large view)

Mini Starter

This is the starter we recommend for use with all of our big block and small block header applications. It's not the only starter that will work, but it's the one most commonly available new - from us or your Dodge dealer. In fact, it's the starter we use to test fit all of our headers. See additional information and installation photos here.

*NOTE: We carry limited stock on this item. On occasion shipment of Mini Starter might be delayed due to re-stocking time.

 

HMS - $167 + $15 S&H


B/RB Header Ball-Joint Flange Pipes

Adjustability! B/RB Header Ball-Joint Flange Pipes. Designed to weld to existing exhaust systems. You can also create your own exhaust system using these flange pipes. Fits all body applications as the ball joint connection allows almost every conceivable rotation/adjustment that would ever be needed. Includes bolts, nuts, lock clips. Click here for more information and pictures.

Accurate Ltd has a complete bolt-on exhaust system that is compatible with our headers.

*NOTE* On occasion shipment of Flange Pipes might be delayed due to restocking time

HFBJ - $95 + $15 S&H


B/RB Header Flange Pipes

(click image for large view)

B/RB Header Flange Pipes

13'' B/RB Header Flange Pipes. Designed to weld to existing exhaust systems. You can also create your own exhaust system using these flange pipes. Includes gaskets and hardware. Click here for more information and pictures.

Accurate Ltd has a complete bolt-on exhaust system that is compatible with our headers.

*NOTE* On occasion shipment of Flange Pipes might be delayed due to restocking time

HFP - $90 + $15 S&H


B/RB Header Stud Package

B/RB Header Stud Package

Contains all grade 8 hardware with grade 9 washers. Install as per factory manual.

HSP - $19.50 + $7 S&H


B/RB Shim Pack

Shim Pack

Small position adjustments for header clearance are easy with this kit designed for all biscuit mounting systems. Contains 8 shims, 2 of each: 1/16", 3/16", 1/8", 1/4". For B/RB and small block engines. Available for purchase separately.

SPAK - $26 + $7 S&H


B/RB Header Gasket Kit

B/RB Header Gasket Kit

Contains 8 header gaskets, graphite with metal tang inside. Included for free with B/RB Header purchase or available for purchase separately.

HG - $20 + $7 S&H


Click here to see our Header Package Deals!


Like Us on FacebookGoogle+TwitterYouTube
Engine Swaps Newsletter

Sign up to receive news, announcements and new product information by email

 


Home | About Us | Contact | Products | Instructions | Ordering | Customer Photos
Schumacher Creative Services ©2010